Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateWhy Boulder City Homeowners Choose Lennox HVAC
We provide independent Lennox HVAC service in Boulder City, NV: repair, replacement, and maintenance for the Lennox equipment you already own. What makes our Lennox work different is pattern recognition. An independent shop that sees Lennox air conditioners, furnaces, heat pumps, and ductless systems week after week learns the brand’s recurring failure points, and that knowledge is not tied to a dealer network or a sales quota. As an independent Lennox service provider, we’re not affiliated with or authorized by Lennox, and we tell you that plainly. Our technicians have up to 12 years of experience. If your Lennox system is down or you’re weighing a replacement, call (888) 906-2267. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Trust AC Repair Boulder City for Your Lennox HVAC?
Lennox builds equipment across a wide quality span, and the right approach changes with the tier. A single-stage Merit condensing unit and a variable-capacity Elite or Signature system are both Lennox, and both say so on the badge. They fail differently, they diagnose differently, and they deserve different repair decisions. Our technicians work on Lennox equipment often enough to recognize which tier they’re looking at before the gauges come off the manifold, and that shapes what we recommend from the first minute.
We use quality parts that fit Lennox equipment, including control boards, thermostats, ignitors, and TXVs matched to the system rather than a one-size substitute. That matters for warranty safety. Installing parts that don’t meet the equipment’s spec is one of the fastest ways to create a coverage dispute, so we keep repairs aligned with what the manufacturer would expect to see. We don’t claim to stock genuine Lennox parts or to be a Lennox dealer. We run independent diagnostics and stand behind the work through our own accountability, not through a factory badge. The call is free: (888) 906-2267.
Styles & brands we work with
- AC installation
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Common Lennox HVAC Problems We Fix in Boulder City
Lennox failures cluster around a few patterns. Here’s what we see most, why it happens, and what it usually means for the repair.
- Thermostat-to-board communication loss on communicating systems. Elite and Signature units run a communication bus between thermostat and control board. When the iComfort thermostat loses that link, the system locks out or drops to reduced capacity, and the display reads something like “communication lost.” Nine times out of ten, the right call is to diagnose at the board, check the wiring and low-voltage signal, and either re-pair the thermostat or replace a failed board. Swapping the whole system over this is a misdiagnosis.
- TXV and refrigerant-charge trouble on Merit coils. On 14ACX and XC14 equipment, a stuck or scaled TXV shows up as a frozen suction line and high head pressure, which hits especially hard through a Boulder City summer. The symptom looks like low charge and often isn’t. If a technician can’t tell the two apart, they’ll add refrigerant to a system that doesn’t need it and the freeze comes back within the week.
- Failed run and start capacitors on single-stage Merit condensing units. A capacitor that’s given up its capacitance lets the compressor hum without starting. In Boulder City’s desert heat, an outdoor unit baking in triple digits works harder and fails sooner. It’s a small part with a big symptom, and it’s usually a straightforward repair once the compressor windings test clean.
- Cracked heat exchangers and failed ignitors or flame sensors on older furnaces. On ML180 and G40/G50-series equipment, ignition faults show up as a furnace that tries to light and gives up. A cracked heat exchanger is more serious: it can let combustion gases into the supply air. Secondary heat exchanger corrosion is a known issue on some 90%+ models, and it’s one of the reasons we treat a heat exchanger diagnosis as a safety decision, not a sales one.
- Start-component and hard-start issues on single-stage condensing units. A pitted contactor or a worn hard-start kit can make an outdoor unit chatter or trip the breaker on hot starts. We test the compressor windings, the contactor, and the start components in sequence so the failed part gets replaced and nothing else does.
How a Lennox no-cool call usually goes in Boulder City
A homeowner with a Merit-series Lennox split system calls because the outdoor unit hums but won’t start in July heat. A technician typically finds a failed run capacitor or a pitted contactor, tests the compressor windings, and replaces the failed start component before checking charge and pressures. On an Elite or Signature unit, the same no-cool call more often traces to a lost thermostat-to-board communication or a tripped low-voltage fault that has to be diagnosed at the control board before any parts are ordered. Same symptom, different path, and that’s why brand familiarity matters.
Lennox Parts & Our Repair-vs-Replace Approach
We choose parts by what the equipment needs, not by what a parts shelf happens to hold. For Lennox control boards, thermostats, ignitors, and TXVs, that means OEM or exact-equivalent parts that meet the system’s spec. For capacitors, contactors, and other wear items, it means quality aftermarket parts that hold up in desert heat. What we won’t do is substitute a part that fits the hole but not the system, then hand you a bill for a second diagnosis when it fails.
The repair-or-replace call comes down to what’s failed and what you’re working with. A compressor failure or a heat exchanger failure on an older Merit unit usually tips toward replacement, because the repair cost climbs toward what a new system costs and the rest of the equipment is near the end of its service life. A Signature or Elite system with a good condenser is a different picture: those are usually worth repairing, even when the repair itself isn’t cheap, because the equipment underneath is worth keeping. We’ll quote both paths with a written estimate and let you decide. Call (888) 906-2267 for a free estimate.
| Service | Typical Estimated Range |
|---|---|
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| AC Installation | $3,500 – $7,500 |
| Tune-Up | $80 – $200 |
These are typical estimates, not quotes. The written estimate sets the final price on your job.
Our Lennox Service Process – Step by Step
- 1
Diagnosis. We start with the fault codes and the communication status on Lennox control boards before touching anything mechanical. On a communicating system, we verify the thermostat-to-board link, check the low-voltage wiring, and rule out a re-pair or wiring fault before anyone suggests a board. On a Merit single-stage unit, we test capacitors, contactors, compressor windings, and refrigerant pressures in that order.
- 2
Repair or replacement. We give you a written estimate with the actual failed parts and the reasoning, then lay out the replacement option if the repair stops making financial sense. You choose. Nothing gets ordered until you sign off.
- 3
Testing. After the repair, we run the system through a full cooling or heating cycle, verify charge against the equipment spec, check temperature split at the supply and return, and confirm the fault codes are cleared and stay cleared. For an install, this step includes load verification and duct review, so the new unit matches the space rather than the old footprint.
- 4
Warranty and records. We document what we replaced, keep the part numbers on file, and hand you the record so your manufacturer warranty stays intact. That documentation is what protects you if a claim ever comes up later.
See the difference
Before
After
Before
After
Before
AfterLennox Products We Service & Install in Boulder City
We work on Lennox air conditioners – from single-stage Merit units up through variable-capacity Elite and Dave Lennox Signature models – along with Lennox furnaces across the Merit, Elite, and Signature tiers. We also service Lennox heat pumps and ductless mini-split systems, including the smaller wall-mounted units common in Boulder City’s older homes. That covers the full line of equipment an owner is likely to find on their property. If it’s Lennox, it’s in scope. Whether you need a repair today or you’re planning a replacement, we can look at it and give you a straight answer. We don’t stock equipment or maintain an inventory, and we won’t tell you we do.
We Also Service These Brands
Lennox is one brand among many, and we don’t limit ourselves to it. Our technicians also work on Carrier and Trane equipment, so a mixed-brand home or a proposed upgrade doesn’t leave you looking for a second company. The recommendation is based on your system’s condition and your budget, not on which brand we’d rather put in. Call (888) 906-2267.
FAQs – Lennox HVAC Service in Boulder City
No. We’re an independent Lennox service provider and we’re not affiliated with or authorized by Lennox. That independence is the point: we diagnose the system on its condition and tell you what it actually needs, without a dealer network or manufacturer sales program steering the recommendation. Call (888) 906-2267 for a free estimate.

Yes. We use OEM or exact-equivalent parts for control boards, thermostats, ignitors, and TXVs, with quality aftermarket capacitors and contactors where they meet the system spec. What we don’t do is substitute a part that fits the connection but not the equipment. If a part won’t hold up in Boulder City’s summer heat, we don’t put it in. Call (888) 906-2267 for a free estimate.
Most Lennox AC repairs are a same-day visit, usually an hour or two on-site depending on what’s wrong. A capacitor or contactor is quick. A compressor or heat exchanger takes longer because the diagnostic and the replacement work are both involved. Repairs on communicating systems can add time since the board diagnosis runs first. Call (888) 906-2267 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
We service and install Lennox air conditioners across the Merit, Elite, and Signature tiers, Lennox furnaces, Lennox heat pumps, and Lennox ductless mini-split systems. That covers the equipment most Boulder City homeowners have. If your Lennox product is on the property, call (888) 906-2267 and we’ll tell you whether it’s in scope.
No, service from an independent provider doesn’t void your warranty by itself. What can complicate a claim is a repair performed with parts that don’t meet the manufacturer’s spec, or a lack of documentation. We use parts that meet spec and keep records of what we replaced, so your coverage stays intact. Call (888) 906-2267 for a free estimate.
Typical estimated ranges are $150 – $650 for AC repair, $150 – $700 for furnace repair, $3,500 – $7,500 for AC installation, and $80 – $200 for a tune-up. Those are estimates, not quotes: the written estimate sets the final price for your job. Call (888) 906-2267 for a free estimate.
No, almost never. That message means the thermostat and control board have lost their communication link, not that the equipment is finished. The usual causes are wiring, a failed board, or a stat that needs re-pairing. Diagnose at the board first. Call (888) 906-2267 for a free estimate.
Frozen suction lines on a 14ACX usually point to a TXV or charge problem, not just low refrigerant. The distinction matters at 100°F+ because the wrong fix (adding refrigerant) comes back within days. A technician should test the TXV and check pressures before adding anything. Call (888) 906-2267 for a free estimate.
Often not on an older Merit furnace. A cracked heat exchanger is a safety issue because combustion gases can enter the supply air, and on a system near end of life the repair cost usually tips toward replacement. On a Signature or Elite furnace with good equipment underneath, repair can make sense. Get it looked at directly. Call (888) 906-2267 for a free estimate.
Short-cycling on an SLP98V is usually a control or airflow problem, not a failed heat exchanger. Common causes are a failed flame sensor, a dirty flame sensor that needs cleaning, a blocked vent, or a communication fault on the control board. Each has a different fix, so it has to be diagnosed rather than guessed at. Call (888) 906-2267 for a free estimate.
An independent shop can service your Lennox heat pump or mini-split. You don’t need a dealer for routine service or repair. What you need is a technician who knows the equipment’s failure patterns, and that’s what a Lennox-focused independent shop delivers. Call (888) 906-2267 for a free estimate.
Book Your Lennox Service in Boulder City, NV
Lennox repair, replacement, and maintenance in Boulder City, handled by an independent AC-only specialist who knows the brand’s failure patterns. Call (888) 906-2267 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is written and the price is set per job, so you’ll know the cost before work begins.
Written by the team at AC Repair Boulder City.